Econox USA Logo
330.678.3889
info@econox.us

CarboProbe LT

The CarboProbe LT is a low temperature heated probe, intended for use in flues and boilers where the temperature of the gases are below 600°C (1100°F). It incorporates a heater to maintain the sensor at its working temperature, even if the gas is at a much lower temperature.

Special Requirements

The LT probe requires a separate instrument panel providing power and temperature control for the heater, purge timing and purge gas.

Documentation

Download the pdf Instruction Manual

Download the pdf Brochure

Download the pdf Technical Sheet

Ordering Information

CarboProbe LT, 300 mm (11.8"), K, 2" connection Buy Online
CarboProbe LT, 400 mm (15.7"), K, 2" connection Buy Online
CarboProbe LT, 500 mm (19.7"), K, 2" connection Buy Online
CarboProbe LT, 600 mm (23.6"), K, 2" connection Buy Online
CarboProbe LT, 700 mm (27.5"), K, 2" connection Buy Online
CarboProbe LT, 800 mm (31.5"), K, 2" connection Buy Online
CarboProbe LT, 900 mm (35.4"), K, 2" connection Buy Online
CarboProbe LT, 1000 mm (39.4"), K, 2" connection Buy Online

Do you have a special request? Don’t hesitate to ask!

Technical Characteristics

Output 0 to 1200 mv
Redout impedance This probe should be used with controlling, recording, and indicating instruments having input impedance of 8 megaohms or higher.
Accuracy ±2 mV in normal operating range
Response time Less than 1 second
Thermocouple K
Operating temperature 700°C (1290°F)
Available lengths 300mm (11.8"), 400mm (15.7"), 500mm (19.7"), 600mm (23.6"), 700mm (27.5"), 800mm (31.5"), 900mm (35.4"), 1000mm (39.4")
Reference air Uncontaminated dry air at maximum rate of 1 l/h
Cleaning air Uncontaminated dry air at maximum rate of 300 l/h
External diameter 51 mm (~2")